Trend Lock Jig
Description
Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks. For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate. Deeper mortises can be achieved with a suitable size of auger bit. Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood. Steel plates & body. An auger bit and drill is required to complete deep mortises. The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise. Contents: 1 x Guide Bush Collar 12 x Face Plate Templates 5 x Mortise Templates 6 x Spacer FingersFeatures & Benefits• For cutting commonly needed mortise & face plate recesses • Includes 16 interchangeable templates • Suitable for most common sash mortises and dead locks • Fast, clean and accurate results on doors 34mm - 58mm thick • Additional templates available separatelyContents• Guide Bush Collar • 7/8"x 1/8" (22.2x156 mm) Face Plate Template • 7/8"x 6 " (22.5x152.5 mm) Face Plate Template • 1"x 4 3/4" (25.4x121 mm) Face Plate Template • 1"x 5" (25.4x127.5 mm) Face Plate Template • 1"x 5 1/4" (25.4x133.5 mm) Face Plate Template • 1"x 5 3/4" (25.4x145 mm) Face Plate Template • 1"x 6" (25.4x153 mm) Face Plate Template • 1"x 6" (25.4x156.5 mm) Face Plate Template • 1"x 6 1/2" (25.4x165.5 mm) Face Plate Template • 1"x 7" (25.4x177 mm) Face Plate Template • 1"x 2 1/4" (25x57.5 mm) Upper Face Plate Template • 1"x 2 1/4" (26x56.5 mm) Lower Face Plate Template • 1"x 6 3/8" (25.6x162mm) Face Plate Template • 5/8" x 2 7/8" (16x72 mm) Mortise Template • 5/8" x 4 1/4" (16x107 mm) Mortise Template • 3/4" x 3 1/8" (19x78 mm) Mortise Template • 3/4" x 4 1/4" (19x109 mm) Mortise Template • Spacer Fingers (x6)
You may also like
loading