Description
Each tile is 30. 48cm x 30. 48cm (1. 2mm thickness) You will receive 2 packs of 11 tiles = 2 square metres This is a budget friendly solution for covering floors in your home. The flooring is easy to install with just a utility knife. The peel and stick function means less mess and no dust is created when laying this floor. The vinyl tiles have a waterproof surface, so suitable for low wet areas like a bathroom, but not suitable for wet rooms or in the shower. Ideal for rented, these tiles are removable when it’s time to leave! Application :- 1) Avoid uneven surfaces e. g. floor boards, floating floors, concrete, lino, carpet or radiant heated floors 2) We recommend levelling the floor prior to installation to achieve an optimal finish 3) Hardboard can be laid if floor is not completely flat 4) Allow 48 hours to acclimate to room temperature of at least 18C 5) Ensure floor is thoroughly cleaned and free from dust and grit 6) Extra adhesive can be used to help the tiles adhere if needed e. g. Bostik or similar 7) Score tile with a utility knife and snap back 8) Check reverse of the tile for any pattern matches (if any), lay in the direction of the arrows shown 9) Rotate the tile when laying to make sure it’s the right way around. You might find a slight variation in design match from tile to tile. The variation should not affect the overall look of your flooring Aftercare :- 1) Wipe clean using regular household cleaner, use vacuums and mops as normal, 5 days after application 2) Remove tiles by lifting the corner and peeling back, use heat from a hairdryer to help soften the adhesive 3) These tiles are not slip resistant, place a mat down for any wet areas like a bathroom
You may also like
loading
Discover more
