LOOPS 80W Mini WiFi Stereo Amplifier & 4x 80W Bathroom Ceiling Speaker Audio System

Contents: 1x 80W (2x 40W Max) Wi-Fi Stereo Amplifier 4x 80W White Moisture Resistant Ceiling Speakers 2x 10m Speaker Cable Instruction Manuals Amplifier Overview: Wi-Fi Control dia Unlike previous generation amplifiers that allow a wireless connection via Bluetooth, this amplifier connects to your devices wirelessly via Wi-Fi / the internet. There are a number of reasons as to why this is a major improvement, but the main ones are: Range dia Bluetooth has a range of around 10m. With Wi-Fi, the only range is your internet signal. If you get the internet at one side of your house / garden, you will be able to control this amplifier. Reliability and Connection - Wi-Fi is much more secure than Bluetooth so no unwanted connections can occur. Wi-Fi is also much more stable and is less likely to drop signal or break up like Bluetooth App Control dia This amplifier has its own (FREE) Phone / Tablet app that allows you to link your Spotify / Amazon Music / Apple Music / Digital Radio all through one simple app. No need for a separate remote. Simply hide the amp away and you can control everything without needing line of sight. App is Compatible with dia ANDROID dia and dia iOS. Multi-Room / Zoning The clever app allows you to set-up and control multiple amplifiers from a single device (app). This is perfect for multi-room / multi-zone applications where you would like to control the volume of each system separately / combine zones into 1, all from your phone / tablet. Depending on the level of music streaming service you use, you can also play different things in different zones at the same time and control all volumes separately. This is an incredibly versatile piece of kit and a fantastic alternative to dia SONOS. Power dia The amplifier may be small, but it packs a punch, at peak, this small unit will pump out an impressive 80W max @ 4OHM (2x 40W). However, thanks to the latest, CLASS-D DIGITAL sound reproduction technology, this little stereo amplifier sounds much louder than the figures suggest It really is impressive! The amp can handle any domestic environment and most commercial environments (depending on the nature of the install). Size Thanks to its compact size, this amplifier can be hidden out of sight in places such as above kitchen units and in ceiling voids. Once set up and the power is connected, you don't need to touch it again to play music wirelessly. Connectivity Not all devices have a Wi-Fi option such as CD players or TVs. Don t worry, this amplifier has an auxiliary input, it is also supplied with a connection cable to save you the hassle of ordering one. As well as an Aux input, it also accepts Micro SD cards and USB input. Features: 1x Wi-Fi Module 1x Auxiliary Input 1x MicroSD Card Slot 1x USB Slot 4x Push Fit Terminals for connecting speaker cable 1x 15V 2A Power Supply Connector Sleek and Minimalistic plastic body with rubber base. Wired Connections: Push Release Speaker TerminalsSpeaker Connections 4 to 8 ohm Labelled; (R- and R+) for negative and positive connections to the right speaker(s), (L- and L+) for negative and positive connections to the left speaker(s). 3.5mm Auxiliary InputFor a direct wired connection to a source device such as a smartphone. Micro SD Card The amplifier can also play MP3 tracks stored on a Micro SD Card. Simply insert card at the bottom of the panel. USB PortThe amplifier can also play MP3 tracks stored on a USB stick. Amplifier dia Technical Specification: Output Impedance: 4 to 8 Ohms Output Power RMS: 2 x 15W @ 8 Ohms (30W) Output Power MAX: 2 x 20W @ 8 Ohms (40W) Output Power RMS: 2 x 30W @ 4 Ohms (60W) Output Power MAX: 2 x 40W @ 4 Ohms (80W) Operating Voltage: 15V DC / 2A (Power Adapter Supplied) Frequency Response: 20Hz to 20 KHz Dimensions (HxWxD): 74x74x21mmWEIGHT: 79.5g SpeakersTechnical Specification : 2-Way Speakers Max Power 80w Power RMS 40w Frequency Response 80Hz-18kHz Impedance 8 ohms Moisture resistant Dual Cone Speaker 13cm / 5" Woofer with Polypropylene cone 5cm (2") Tweet with Mylar Cone 6mm Spade terminal connectors Built-In Crossover All Fixings supplied 130mm diameter, for fitting to a 114mm cut-out / Depth 65mm HOW TO INSTALL: 1)Run all of the cables you need to run before starting the install, this includes mains power cables, speaker cables and any other audio cables (for AUX ports). dia PLEASE ENSURE THAT ELECTRICITY IS TURNED OFF WHEN INSTALLING. 2)You now need to prepare your wall for the amplifier to be mounted, you will need to cut dia a hole for this to be recess mounted or use dia a surface mounted back box (please see Supplied instruction manual for full details). 3)Wire the mains power cable and speaker cables to rear of the amplifier via the screw terminal connections. Connect the other end of the speaker cables to the speakers ensuring that you wire positive to positive and negative to negative. 4)You can now power up the unit, select dia a source and listen to your chosen music. Connecting to Wi-Fi: 1