Description
A dual roller blind with a new design: Thanks to the elliptical shapes, this blind offers you protection against the sun and onlookers in a fresh, eye-catching design. The combination of 2 parallel panels, with alternating transparent and opaque ellipses, let you individually adjust the amount of incoming light. With the aid of the side pull chain, the position of the fabric panels can be set precisely so that either more daylight penetrates through the transparent ellipses or the opaque ellipses allow you to stay protected from prying eyes. This function can be used at any height, as the fabric can be completely rolled up and down, as with any conventional side-pull roller blind. No screws - simply clip it in! A further highlight is that the dual roller blinds can be assembled quickly and easily using the adjustable clamp brackets. These are simply clamped along the window rail of the double roller blind on the window sash. In rented homes, holes in the wall of windows can be a big problem. With the clamp brackets, this is no longer the case! Neither drilling nor screws are necessary with these clamp brackets and thus, there is no need to make holes in the wall. The brackets included also make wall, ceiling, or window planning installation possible. How to measure the correct width: Measure the dimensions of the rail plus the desired overlap. Make sure to pay attention to the window sill! Add 4cm to the width and you will then have your desired order width. If the width is not available, order the next size up. Please note the maximum possible width from the window handle to the window sash on the opposite side. For example, with a width of 75cm, 4cm are added to the width which would mean the next possible order size is 80cm. The ordered width indicates the total width of the roller blind - the fabric is always 4 cm narrower than the specified order width! Order width- fabric width: 45 cm- 41 cm 60 cm- 56 cm 70 cm- 66 cm 80 cm- 76 cm 90 cm- 86 cm 100 cm- 96 cm 110 cm- 106 cm Please note: The maximum depth of the window frame must not exceed 2.1 cm and not go below 1.6 cm (without seal), as the clamp bracket is only adjustable in this area. The rail height is 4.5 cm, the depth of the roller blind including the bracket is 6 cm. Size: 150cm L x 80cm W, Colour: White
You may also like
loading
Discover more
