HyperX Savage 16GB Kit (2x8GB) DDR4 2400MHz Intel XMP CL12 DIMM Memory

Ebuyer.com £143.99 Go to Ebuyer.com First seen in Dec 2016

Price Tracked On This Product

Highest price was seen £143.99 on 13 Jun 2017

Lowest price was seen £140.99 on 25 May 2017

Average price is £140.86 base on 7 price changes

Most recent price is £143.99

Description

HyperX Savage 16GB Kit* (2x8GB)- DDR4 2400MHz Intel XMP CL12 DIMM Memory HyperX HX424C12SB2K2/16 is a kit of two 1G x 64-bit (8GB) DDR4-2400 CL12 SDRAM (Synchronous DRAM) 2Rx8, memory modules, based on sixteen 512M x 8-bit FBGA components per module. Total kit capacity is 16GB. Each module supports Intel XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2400 at a low latency timing of 12-14-14 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows: XMP TIMING PARAMETERS JEDEC: DDR4-2133 CL15-15-15 @1.2V XMP Profile #1: DDR4-2400 CL12-14-14 @1.35V XMP Profile #2: DDR4-2133 CL13-13-13 @1.2V SPECIFICATIONS CL(IDD) 15 cycles Row Cycle Time (tRCmin) 46.5ns (min.) Refresh to Active/Refresh Command Time (tRFCmin) 260ns (min.) Row Active Time (tRASmin) 33ns (min.) Maximum Operating Power TBD W* UL Rating 94 V - 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC *Power will vary depending on the SDRAM used. FEATURES Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP - 2.5V Typical VDDSPD = 2.25V to 3.6V On-Die termination (ODT) 16 internal banks; 4 groups of 4 banks each Bi-Directional Differential Data Strobe 8 bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop) Height 1.36” (34.57mm)