Elliot Brown 101-001-R06-12HR Men's Holton GMT Bezel Wristwatch

The Holton Professional was developed in response to a request from a specialist branch of the military who demanded a fit-for-purpose professional watch capable of a life in the field. This version is identical to the 101-001-R06 but is fitted with a 12hr bezel rather than a 60min countdown bezel. To use the 12hr bezel, simply turn it anticlockwise until the hour markers on the bezel correspond to the appropriate time difference and you can read off the time in the second time zone using the hour hand in conjunction with the bezel. If you're struggling to choose between the quartz and automatic versions, we wrote a little article here on the pros and cons of each. The Brief: capable of prolonged exposure to water and dust, durable, shock resistant, clear visibility day or night, unidirectional timing bezel operable with a gloved hand, easy strap changes and comfortable strapping options that don't break. The spec of the bezel gives a perfect insight into the level of detail required for the project to be successful. A precise 120 click high grip bezel houses a stainless steel insert embossed with hours and minutes indentations then flooded with high grade C3 SuperLuminova. The hobnail outer knurling is slightly higher than the insert to form a high grip surface for trustworthy operation even when using the palm of a wet gloved hand. Both components are matt bead blasted, hardened to 1200HV (Vickers hardness scale) then a 0.8 micron PVD coating is applied whose hardness matches that of the stainless steel components. We are a Elliot Brown authorised dealer Brand new boxed stock with full retail boxes & paperwork 5 Year warranty Bezel: high grip, uni directional divers bezel case hardened to 1200HV Vickers hardness with matt PVD coating whose hardness matches that of the hardened bezel. Highly resistant to marking and provides an outer layer of protection for the watch. The high grip texture enables the bezel to be turned by gripping the sides or pressing downwards and the fine hobnail pattern ensures the bezel can't be caught on anything, turning it accidentally Case: 316L stainless, anti reflective gunmetal PVD, treated with an anti-fingerprint coating that naturally repels mud and grime. PVD thickness 0.8 microns so it wears beautifully for years - the maximum possible thickness without loss of definition on case detailing (approx twice the industry standard thickness). Every watch is individually pressure tested to 200m at several points during production Crown: easy to use yet highly protected. Deeply recessed, screws down into watch case, triple sealed, hobnail knurling for secure grip, 4H position keeps it out of harms way Dial: easy to read at a glance day or night with a military bearing that’s relevant and familiar. The hour markers are bold C3-coated parallelograms reminiscent of 1970s military dive watches, brought up to date with our trademark 12-3-6-9 cardinal graphics, with a white triangle at 12H to help orientate the watch when it’s dark Hands: clear differentiation between hours, minutes and seconds hands with minimal chance of confusion. Short stubby ‘sword’ hour hand, long slender parallel minutes hand with pointed tip that reaches precisely to the minute markers. The seconds hand has a fine amber painted tip and C3 filled arrow head counterbalanced by a dark gunmetal ‘lollipop’ Crystal: bevelled 2mm sapphire with anti reflective coating applied to the inner surface to minimise glare for perfect visibility in all light conditions. To pass QC, every crystal must be capable of withstanding an impact applied 3 times by a 17mm steel ball dropped from 0.5m Movement: Swiss Ronda calibre 715 with low-battery/end of life indicator that prevents the watch being issued with a low battery. It is housed inside a proprietary shock protection system consisting of a steel housing suspended by elastomer shock absorbers. Projected battery life is approximately 3 years Strap: Premium matt black EPDM rubber strap with gunmetal buckle. Perfect for all sports. Silicone-free, hypo-allergenic, unaffected by ozone, seawater, or UV.Smart appearance with chamfered edges to slide underneath shirt cuffs. All 22mm Elliot Brown straps also fit Strap fixing: solid steel strap bars that screw directly into the case shoulders, driven by a 5-lobe head so that the driver (included with the watch) can't slip or climb out, ensuring simple and fast strap changes whilst also providing maximum security - no spring-bars to break Caseback: bolted down using hex bolts creating a perfect compression seal and correct tension for the shock absorption system. Multiple surfaces minimise skin contact for comfort and bolting the case down ensures the case back logo and detailing are always aligned perfectly 9H-3H 43mm excluding crown12H-6H - 52mm max to tip of case shouldersMaximum thickness 12mmFits up to 190mm/7.5" wrist perfectly