Bestway Pool Heater

​Bestway Pool Heater ✅ Increase water temperature approx. 0.5℃ to 1.5℃ per hour dependent on pool size ✅ Easy to Setup ✅ Universal pool heater for above ground pools up to 15ft or smaller. Bestway® Pool Heater is a simple and effective way to warm up water in your above ground pool, creating a comfortable and relaxing environment to swim, paddle or play in. The outdoor pool heater is perfect for use with Bestway® pools and is compatible with sand and filter pumps 1000 gallons and below. The electric pool heater has two hose outlets, one of which connects it to a filter pump and the other to your above ground pool. Clear, clean and pristine water is pumped into the above ground pool heater via the filter pump, where it's then heated and pumped back into the pool. The swimming pool heating system is compatible with filter pumps and sand filters with a flow rate of 1,000gal/hr (3,785L) or less. The swimming pool heater, which has a 4m power cord to plug it into to an electrical outlet, comes with all the necessary hoses and attachments, ensuring a swift and simple set up. Depending on your pool size and your preferred temperature the pool heater can take anywhere between 12 hours to 3 days to warm the water. The swimming pool heater has the ability to increase water temperature by approximately 0.5°C to 1.5°C per hour. Once again, this varies from pool size to pool size. Please note that this pool heater does not include a thermostat to adjust the temperature setting. If taking a dip in the water makes your toes turn blue, then the Bestway® Pool Heater is an absolute essential. It's one of many products designed to enhance your above ground pool experience in the Bestway® Pool Accessories collection. Pool heater is supplied with a portable residual current device with RCD not exceeding 10mA. This product cannot be used with an extension lead or cable. The heater is compatible with filter pumps with flow rates up to 3,785 L (1,000gal). Please note pump is required for pool heater to work effectively; heater connects to the pool filter via 32mm hose connection. Please note the heater set up in the manual is incorrect, please refer to the below: Setup Instructions The heater is set up in the following order: 1. Connect hose from “A” to the pool heater 2. Make sure the arrow on the heater is facing the filter pump The hose will connect from the heater into the filter pump 3. Connect hose from filter pump into “B” Specifications: *220-240V ~ 50Hz, Class II.Energy: 2,800W at 20°C - (please note: This product uses a 220-240V plug designed for the UK market. If youre purchasing outside of the UK, please ensure you have the correct converters/power supply to ensure you can use this device. It may be worth seeking the advice of a local electrician before purchase) Heats between 0.5C & 1.5C p/h 220-240V~50Hz, 2,800W at 20ºC, increases the swimming pool water temperature by approximately 0.5-1.5ºC/h (1-3ºF/h) depending on total water volume, Maximum heater output: 40ºC (104ºF), compatible with:swimming pools: 4.57m (15’) and smaller, swimming pool water volume:1,520 ~ 17,000L, Filter pump/Sand filter flow rate: 3,785L/h and below 3,785L/h, CE approved, GS approved, EMC approved. Warranty: Heater Unit – 12 months Warranty: Hoses & Accessories – 1 month Box dimension: Length: 48cm Depth: 29cm Height: 25cm Power Cable Length: 4m approx. Full detailed instructions included