Description
The board surface is made of tempered glass (4mm thick). It has sanded edges to right eagle. The glass is thermally toughened. As a result no sharp-edged fragments are created. In the event of a breakage the risk of any cuts and impact injuries is reduced, since the glass breaks down into many small, slightly rounded and far less dangerous fragments. The glass board can be mounted vertically or horizontally on the wall and protrudes approx. 5mm from the wall. Similar to other common fastening systems, such as cabinets hanging in the kitchen, the boards are placed on rails from the size of 120×90 cm, which are included. The glass board can be also easily and securely attached to plaster board by using appropriate dowels. However when hanging at plasterboard only dedicated dowels which withstand the tension are suitable. For other types of walls such as autoclaved aerated concrete, concrete or brick, plugs and screws with countersunk heads with a head diameter of 7-8 mm are required. Accurate adherence to information provided is key. If the screw head is too small, the glass board may come off it, while if the screw head is too large, the screw head will not fit into the hole punched in the glass plate.
You may also like
loading
Discover more
