AIM Motorsport SmartyCam 3 Corsa HD Camera

The AiM SmartyCam 3 Corsa camera system has been designed to be the ultimate Motorsport on-board camera. It can record all the track action in full 1080p HD video at 60 FPS and can include all the technical information that will help you improve your performance.The SmartyCam 3 Corsa is available with two lens options, and each being available with a choice of a 2 or 4 metre length CAN expansion cable:67° lens - This is preferred for closed-roof cars, as it "sees" the track just within the wind-screen pillars, reducing that unpleasant black frame typical of generic camera on-board videos.84º lens - This is more favoured for open-roof and formula cars, where it is possible to have a more ample view of the track and there is no risk of black frames.Intelligent settings allow the camera to automatically start / stop recording by using the inbuilt 3 axis accelerometer so you can concentrate on the track. A wide colour TFT display offers immediate playback and helps with setting up. Intelligent settings allow the camera to automatically start / stop recording. The last thing you need to think about at the starting line is turning your camera on. SmartyCam 3 Corsa does all the work and is fully configurable to your timing preference. A colour 2.4 display offers immediate, high quality playback and more importantly, helps with setting up.Real time configurable data overlays:  When connected to an AIM logger / dash logger or optional GPS module, and using Race Studio 3, you can configure your overlays in a virtually infinite variety of ways: add your logo and the track map, choose your graphical objects from a list of pre-determined sets with same layout or even single objects from different sets. This way your videos will be truly "yours . SmartyCam 3 overlays all data you need: speed, RPM, lap number, gear shifts and much more. Data can be read from all the possible sources. From GPS: track map and vehicle position as well as speed, lap and split times. From AiM logger / dash logger connected to your ECU: RPM, throttle, engaged gear, acceleration, temperatures, pressures etc. From additional sensors connected to your AiM logger / dash logger.Full internal datalogger: All data received from the CAN bus and from the internal sensors are recorded in .mp4 files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card is sold separately (up to 2TB).No "Wave Effect" with Global Shutter CMOS: Engine rumble cause vibrations, which are a big problem for video recording. You will never experience again that seasick wave effect you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam 3 cameras have been designed for harsh Motorsport environments and for those vibrations. Wave effect is just a distant memory.Direct CAN ECU connection : A separately available CAN ECU connection cable offers direct connection to the CAN-bus line of the ECU. It allows the use of CAN-bus communication protocols included in the official AIM database. This is useful when not connecting to, or using with an AIM logger / dash logger.Sound Recording: As the SmartyCam 3 Corsa is sealed and waterproof to IP65 standards, it will only pick up a muffled interference sound which is fine if all you want to hear is basic engine rpm s, but for anything else the optional external microphone cable is recommended.Video analysis with Race Studio 3 software (free to download and use): The video of a whole session, once downloaded on your PC can now be split with a simple click - into individual videos of each lap so that you can simultaneously watch two of them and check where you were faster or slower. The same operation can be performed with a SmartyCam 3 video recorded on the same track: you will be able to compare your best lap with your friends or instructor s personal best!Designed for extreme conditions: An on-board camera designed for Motorsports must continue to work in the most extreme working conditions typical of track racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extreme high and low temperatures. That is why the SmartyCam 3 Corsa is made in machinery moulded aluminium, just like many competition car parts.Front mounted colour TFT display: A 128x128 pixel TFT colour display offers immediate playback and helps with initial setting up.Higher Storage Capacity: Using a compression system which has been optimised to provide the perfect balance between video quality and file size. Video is stored on an SD card and you can select 3 different recording quality options: High quality, 1 hour = 4GB, Standard quality - 1 hour = 2GB, Low quality - 1 hour = 1.5GB. This means that with a 128GB SD card you can store over 32 hours of footage. SmartyCam 3 Corsa supports SD cards up to 2TB. SD cards are sold separately.Kit contents: SmartyCam 3 Corsa (67° or 84° lens), CAN expansion cable (2m or 4m), Battery charger with AC adapter (UK 3 pin) & USB 2.0 Type A cable.Dimensions: 102.2 x 63 x 46.5mm