Caple 47.5cm x 25cm Single Bowl Inset and Undermount Kitchen Sink Caple
Description
Caple Features:
- Suitable for a waste disposer
- All sink dimensions may vary by plus or minus 2%
- Assembly required
- Mount Type: Undermount;Inset
- Sink Shape: Rectangular
- Material: Ceramic
- Material Details: Ceramic
- Stainless Steel Gauge:
- Resistance Type: Scratch;Stain;Rust;Heat;Fade
- Sound Deadening: No
- Finish: White
- Number of Bowls: Single Bowl
- Basin Split:
- Short Height Divider:
- Waste Position: Centre
- Number of Tap Holes:
- Suitable Water Pressure: Low Pressure
- What's Included: Overflow, Care Instructions
- Tap Included: No
- Tap Material:
- Tap Material Details:
- Tap Finish:
- Flow Rate LPM:
- Tap Type:
- Tap Features:
- Side Spray Included:
- Shut Off Valve Included: No
- Valve Type:
- Overflow Included: No
- Soap Dispenser Included: No
- Soap Dispenser Material:
- Waste Included: Yes
- Basket Strainer Included: Yes
- Basket Strainer Material: Stainless Steel
- Bottom Grid Included: No
- Bottom Grid Material:
- Protective Bumpers:
- Protective Feet:
- Colander Included: No
- Cutting Board Included: No
- Water Trap included: No
- Kitchen Sink Workstation:
- Compatible Cutting Board Part Number:
- Compatible Colander Part Number:
- Product Care: Please refer to care instructions
- Country of Origin: United Arab Emirates
- Made in USA: No
- Accessories Included?: Yes
- Drain Assembly: Yes
- Overflow Hole: Yes
- Additional Pieces Included:
- Compatible Water Trap Part Number: CPK100
- Compatible Tap Part Number: S/CRU5/CH
- Compatible Rubbish/Garbage Disposal Part Number: WDU100
- Compatible Basket Strainer Waste Part Number:
- Compatible Soap Dispenser Part Number:
- Compatible Waste Part Number:
- Compatible Disposal Flange Part Number:
- Fade resistant: No
- Food Waste Disposer's switch Included: No
- ASME A112.18.2 Compliant:
- ASME A112.19.2 Compliant:
- Certifications: No
- ASSE 1001 Certified:
- UL Listed:
- ADA Compliant:
- BS 476 Compliant:
- CALGreen Compliant:
- FIRA Certified:
- GSA Approved:
- ISTA 3A or 6A Certified: No
- ISTA 1A Certified: No
- ISO 14000 Certified:
- ISO 14001 Certified:
- ISO 9000 Certified:
- ISO 9001 Certified:
- ASME A112.19.1:
- ASME A112.19.1/CSA B45.2 - 2018 Compliant:
- CSA Certified:
- ASME A112.19.3 Compliant:
- cUPC Certified:
- cUL Listed:
- UL 1951 Listed:
- IAPMO Certified:
- NAHB Compliant:
- CSA B125.1 Certified:
- Vermont Act 193 Compliant:
- UPC Certified:
- NSF Certified:
- Energy Policy Act 1992 Compliant:
- Stiftung Warentest Note:
- Low Lead Compliant:
- ASME A112.18.1 Compliant:
- Energy Star Compliant: No
- TÃœV Rheinland Certified:
- Environmentally Preferable Certified:
- Environmental Choice Program Certified:
- Environmental Product Declarations - GreenTag:
- SMaRT Certified:
- FISP Certified:
- Blauer Engel:
- CPG Compliant:
- GreenSpec:
- EPP Compliant:
- CE Certified: Yes
- Cut out size: 21.5cm x 44.5cm
- 9cm waste outlet for basket strainer waste
- Overall Length - Side to Side: 25
- Overall Width - Front to Back: 47.5
- Overall Sink Depth - Top to Bottom: 15.5
- Minimum Base Cabinet Width: 30
- Maximum Deck Thickness: 4
- Overall Product Weight: 11.8
- Bowl Width - Front to Back: 18
- Bowl Length - Side to Side: 40.5
- Bowl Depth - Top to Bottom: 13
- Volume Capacity:
- Left Basin - Width (Front to Back):
- Left Basin - Length (Side to Side):
- Left Basin - Depth (Top to Bottom):
- Right Basin - Width (Front to Back):
- Right Basin - Length (Side to Side):
- Right Basin - Depth (Top to Bottom):
- Exposed Low Edge: No
- Exposed Low Edge Height - Top to Bottom:
- Exposed Low Edge Length - Side to Side:
- Tap Holes: No
- Tap Hole Diameter:
- Tap Centres:
- Drain Opening Size: 3.5
- Basket Strainer Diameter: 9
- Unit of Measurement in Dimensional Drawing: mm
- Installation Required: Yes
- Tools Needed for Installation: Depends on type of install, please refer to manual/fitter
- Additional Parts Required: Yes
- Parts Nee
You may also like
loading
Discover more