Sony Vpl-phz10 5000lm

Cost effective laser projection with excellent picture quality, easy installation and low running costs The VPL-PHZ10 laser projector is a versatile, affordable choice for installation in a wide range of education, business and entertainment environments. The powerful Z-Phosphor laser light source is teamed with Sony's advanced BrightEra 3LCD projection engine to deliver extremely bright, detail-packed WUXGA resolution images with generous 5000 lumens brightness and rich, stable colours. This laser light source allows up to 20,000 hours* of virtually zero maintenance operation without the worry of sudden lamp failures. An automated filter system cuts the hassle of regular dust cleaning. Near-zero maintenance needs are complemented by a range of energy-saving features, significantly driving down total lifetime ownership costs. Constant Bright maintains consistent light output levels throughout the laser's 20,000 hours (at light output mode "Middle") recommended lifespan. Offering a stylish blend-in design and low fan noise, the VPL-PHZ10 fits smoothly into almost any environment – from academic institutions to corporate environments. Mount the projector at any angle, even on its side or upside down. Set-up's easier than ever with a friendly new installation menu. Technical Specifications Display system Display system : 3 LCD system Display device Size of effective display area: 0.76” (19.3 mm) x 3 BrightEra LCD Panel, Aspect ratio: 16:10 Number of pixels: 6,912,000 (1920 x 1200 x 3) pixels Projection lens Focus: Manual Zoom - Powered/Manual: Manual Zoom - Ratio: Approx. x 1.45 Throw ratio: 1.28:1 to 1.88:1 Lens shift - Powered/Manual: Manual Lens shift - Range Vertical: +20% to +55% Lens shift - Range Horizontal: +/- 10% Light source Type: Laser diode Filter cleaning / replacement cycle (Max.) Filter cleaning / replacement cycle (Max.): 20,000 H (service maintenance) Screen size Screen size: 40" to 300" (1.02 m to 7.62 m) Light output Mode: Standard: 5,000 lm Color light output Mode: Standard: 5,000 lm Contrast ratio (full white / full black) *1 Contrast ratio (full white / full black): 500,000:1 Speaker Speaker: 16 W (monaural) Displayable scanning frequency Horizontal: 15 kHz to 92 kHz Vertical: 48 Hz to 92 Hz Display resolution Computer signal input: Maximum display resolution: 1920 x 1200 dots *2 Video signal input: NTSC, PAL, SECAM, 480/60p, 576/50i, 720/60p, 720/50p, 1080/60i, 1080/50i. The following items are available for HDMI input only; 1080/60p, 1080/50p, 1080/24p Color System Color System: NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60 Keystone correction (Max.) Horizontal: +/- 30 degrees Vertical: +/- 20 degrees INPUT OUTPUT (Computer/Video/Control) INPUT A: RGB / Y PB PR input connector:Mini D-sub 15 pin (female) Audio input connector: Stereo mini jack INPUT B: HDMI input connector: HDMI 19-pin, HDCP support Audio input connector: HDMI audio support INPUT C: HDMI input connector: HDMI 19-pin, HDCP support Audio input connector: HDMI audio support INPUT D: HDBaseT interface connector: RJ45, 4 play (Video, Audio, LAN, Control) VIDEO IN: Video input connector: BNC Audio input connector: Shared with INPUT A OUTPUT: Audio output connector: Stereo mini jack REMOTE: D-sub 9-pin (male) / RS232C LAN: RJ45, 100BASE-TX (Shared with INPUT D) USB: TYPE-A USB: TYPE-B Acoustic Noise Lamp Mode: Standard 36 dB / Middle 28 dB / Low: 25 dB Operating temperature / Operating humidity Operating temperature / Operating humidity :    0°to 40°C (32°F to 104°F) / 20 % to 80 % (no condensation) Storage temperature / Storage humidity Storage temperature / Storage humidity: -10° to +60°C (14°F to 140°F) / 20 % to 80 % (no condensation) Power requirements Power requirements: AC 100 V to 240 V, 4.3 A to 1.7 A, 50 Hz / 60 Hz Power Consumption AC 100 V to 120 V: Mode: Standard: 424 W AC 220 V to 240 V: Mode: Standard: 403 W Power Consumption (Standby Mode) AC 100 V to 120 V: 0.5 W (when "Standby mode" is set to "Low") AC 220 V to 240 V: 0.5 W (when "Standby mode" is set to "Low") Power Consumption (Networked Standby Mode) AC 100 V to 120 V: 12.5 W (LAN) 13.2 W (optional WLAN module) 16.8 W (HDBaseT) 17.4 W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard") AC 220 V to 240 V: 11.9W (LAN) 12.6W (optional WLAN module) 17.0W (HDBaseT) 17.6W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard") Standby Mode / Networked Standby Mode Activated Standby Mode / Networked Standby Mode Activated: Approx. 2 Minutes Heat dissipation AC 100 V to 120 V: 1446 BTU/h AC 220 V to 240 V: 1374 BTU/h Dimensions (W x H x D) Dimensions (W x H x D) (without protrusions): 510 x 113 x 354.6 mm (20 3/32 x 4 7/16 x 13 31/32 inches) Mass Mass: Approx. 8.7kg (19 lb) Supplied accessories Remote commander: RM-PJ8