Orangatang Nipple Bushings
Description
Features:Diameter: 1"Heights: Tops - 0.56" / Bottoms - 0.66"Durometers: Soft, Medium, HardFormula: Randy ThaneIncludes WashersDesigned to provide a lively and energetic ride, Nipples will revitalize any setup for carving, pumping, dancing, freestyle and freeride. Poured in the extremely high rebound Randy Urethane Formula.The bottom bushing carries most of the riders weight, so it is compressed more than the top bushing. The top bushing engages mostly when the rider leans in one direction to turn. To account for this difference in loading, we made the bottom bushing slightly taller than the top. Both top and bottom barrels are beveled on one edge for a better fit with large cupped washers (such as the stock parts on Paris and Tracker Racetrack trucks). However, we recommend flat washers in general.Nipple bushings fit Paris, Tracker Fastrack, Gullwing Charger II, and old (pre-2010) Bear trucks. They are not compatible with new Bears, Gullwing Chargers, or Indys. Nipples work with Randal trucks, but they do not sit completely contained in the bushing seat. Since the Randal bushing seat is so low, however, it does not interfere with the performance of the bushings. They fit Caliber trucks, but the lean becomes very restricted past a certain point.Many of our ambassadors have also run Nipples in various precision trucks (e.g. Aera and Omen) with good results.This compatibility list is based on the trucks we use most. Nipples will fit in any truck that can accommodate a 1-inch diameter bushing with a height of 0.66 (bottom) and 0.56 (top) inch.
You may also like
loading
Discover more
