Abacus Direct Abacus X Series Wet Room Package with 8mm Glass

The innovative people at Abacus have created a highly adaptable shower glass design that will suit any wet room configuration. All their glass panels have Easi-Clean glass coating technology on one side that significantly reduces the growth of bacteria and the build-up of limescale and mineral deposits, enabling the glass to retain its sparkling quality for longer. The glass panels stand at 2000mm high and come in 12 widths, from 290mm to 1190mm. All panels are available as two thicknesses, 8mm toughened safety glass or 10mm toughened safety glass. The team at Abacus have thoughtfully designed the Colour Your Bathroom range which enables you to have a complete colourway in your bathroom, cloakroom or wet room. As part of this range, Abacus have provided coloured channel packs for the glass to sit in, as well as coloured support fixings for the shower glass. Every last detail is considered so you can achieve your designer bathroom dreams. Once you have chosen the size of glass that fits your requirements, bearing in mind that this is the size of the glass alone, not including the channels for fixing the glass, it’s time to choose the colour of the surface channel pack. There are three beautiful colours available, Black, Nickel and Chrome, one of these is sure to complement the colourway of your bathroom.The coloured surface channel packs comprise of 1 x 1.2m surface channel that can be cut down to the correct size for your glass panel, a 1 x 2.1m surface channel to go the height of the glass panel, a 1 x 1.2m threshold trim and 2 x channel end caps.After you have decided upon the channel pack, there is the fixing kit to be considered. There are three options, all available in 4 stunning finishes: Black, Bronze, Nickel and Chrome. The sturdy wall mounted support fixing is supplied at a length of 1200mm and is designed to be cut down to whatever size you require. There is then the ceiling-mounted support fixing that is 600mm long, again, this can be cut down to a suitable size. The In-Line support fixing (350mm) is suitable for use with smaller side panels where a ceiling or wall support would look too much.These elegant products from Abacus provide endless assembly options for wet room areas, so should you decide you require another panel simply add your first selection to your basket, and then go through the process for the next panel, selecting the width of the glass, the surface channel and then the fixing kit.These highly adaptable wet room glass packages are ideally used with one of the Abacus elements board packages underneath the tiling to ensure that the shower area is fully tanked out and suitable for a wet room enclosure install.  Specifications Easi-Clean Glass Coating Technology Toughened Safety Glass Glass Height - 2000mm Wall-mounted support fixing maximum length 1200mm Ceiling mounted fixing maximum length 600mm In-line support fixing maximum length is 350mm Surface channel pack contains 1 x 1.2m surface channel 1 x 2.1m surface channel 1 x 1.2m threshold trim 2 x channel end caps 8 mm channel packs available in 3 beautiful colours; black, nickel and chrome Support fixings / bracing bars available in four beautiful colours; Black, Bronze, Nickel and Chrome. Please note, all channels, thresholds and wall-mounted support fixings are supplied oversized to be cut down on site.